How to build a mighty house

The construction of a mighty, wooden house is no easy feat, but one builder was determined to do it right.

Amitabh Sharma of the New Delhi-based architectural firm M.S. Sharma & Sons (MS.

S) is credited with inventing the technique of “layers of plywood” which has become the standard for houses built using conventional construction materials.

In a 2010 interview with Architecture News International, Mr. Sharma spoke about the evolution of house building from the wooden frame, to the plywood, to concrete, to timber and now to concrete cement.

The “Layers of Plywood” Method of Building A powerful method of building houses is the use of layers of plywoods or similar materials.

In a nutshell, a layer of ply wood, or other similar materials, is used to build an outer layer of brick.

For example, a “laying layer” of ply can be used to construct a house on a concrete slab, or an outer covering of bricks for a concrete structure.

The plywood is then glued to the bricks using a mortar and pestle to hold the layers together.

The result is a sturdy structure, which can be easily removed and replaced, and which can easily be replaced.

For this purpose, a large amount of lumber is needed.

The lumber is then used to reinforce the concrete, or bricks.

A cement mortar is used on the bricks, and a concrete pestle is used for the mortar.

The bricks are then cut into pieces, and stacked, and the whole construction is finished with the end result being a sturdy, strong structure.

Mr. S. Sharma said, “When I first started working with the technique in 1999, I did not know much about concrete and plywood.

But in 2001 I had the opportunity to visit the site of the original builder of the famous Bali Bali, and learnt from the owner of the Bali village, that concrete was very difficult to work with.

And concrete is one of the most important materials in building houses because it is strong and easy to work.

I had always worked with concrete, so I was looking for a method to work in concrete and the way I came up with the layer of wood was very natural.”

The first plywood house Mr. Shapiro designed was a massive house with a wooden frame.

The house is considered one of India’s most impressive buildings, built in the style of the great Buddhist masters, which have inspired generations of architects.

In its construction, the builders were able to build the house from the foundation to the top floor, with a total height of 1,818 metres.

“The house was designed using a method of using layers of wood as the base, which were then nailed to the base using a mortise and a tenon,” said Mr.

S Sharma.

The concrete used for mortar and the mortar was then used in place of concrete.

The result is an incredibly strong and durable building material.

The second house Mr Sharma designed was called “Ajanta,” and was a house with the same basic structure as the first house, but with a steel frame.

Unlike the first, the second house had a concrete base, but it was covered in steel, and had a total of 3,988 metres in length.

This house was completed in the form of a large structure, with the main structure being a four-storey structure.

“In the first version of the house, I had used steel to build up the building.

It was not enough to build it in steel,” said Ms. Sharma.

She said, in the second version, she used concrete as the material, and used a steel plate as the main support.

The entire building, she said, was steel and concrete, and it was only later that she realised that the whole structure was made out of ply.

“I think that the steel and the concrete are so strong that if they are hit, it will be like steel striking concrete.

This is one reason why the house has such strength,” she said.

The third house was a “Lahuli” house, constructed with steel and ply.

The structure of this house is similar to the first two houses, but the ply used is a different type of ply, with an outer coating of steel, which forms the base.

It is built on a slab of 1.2 metres thick, and can be removed with a mortar.

This type of house, Mr Sharma said is very rare in India.

“We had a lot of steel in the building, but we did not use any concrete.

We just used a slab,” said a very pleased Ms. Sherp.

“This is the first time that a plywood home has been built in India,” she added.

The final building of the building was the “Mukeshwari,” built on steel and a ply.

This building is one the most popular, but very expensive in India, due to the fact that